Hunter Fan 43665 - Manual (Page 33)


OPERATION
Temporary Manual Override
To temporarily change the current set temperature without affecting your program:
■ Press or and hold for about  second to enter
Manual Override mode. Display will flash.
■ Press or to change to your desired new tem-
perature.
■ Press to return to normal mode, or wait 5 seconds for it to return auto-
matically.
■ The current program number will flash to signify the Temporary Over-
ride.
■ At the next program change, the Temporary Override is canceled,
and the next program temperature becomes the setpoint tem-
perature.
To end the Temporary Manual Override:
■ Press to return the set temperature to the current program set temperature.
NOTE: The Auto Season Changeover feature6will not operate while the thermostat is in Temporary Manual Over-
ride. Refer to the Auto Season Changeover feature on page 9 for more information
.
NOTE: If Vacation Hold is set, then the number of days remaining will also be displayed. Refer to the Vacation (Pro-
grammable) Hold section on page 8 for more information.
ret/clear
ret/clear