Honeywell HRXD9 - Manual (Page 120)

Operation
120
Caution Do NOT disconnect the USB cable or the power from the external
drive while copying video clips. If the external drive is shut down
or the USB cable is disconnected while copying video clips, THE
DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message
the next time you try to copy video clips. You will need to power
down the DVR and restart it to get rid of the error message. Once
the file system of the USB-IDE hard disk drive has been corrupted,
this error message cannot be dismissed. Even after restarting the
DVR it may automatically restart while preparing to clip copy. You
must recover the file system using the recovery program, or you
must reformat the hard disk drive.
Print Screen
You can print images from the screen. Connect a PostScript™ printer to one of the USB
ports. A message appears asking you if you want to print the current image.
Figure 4-21 Print Screen
Note If your printer only supports an LPT connection (parallel), use an
LPT to USB converter cable. The printer cable is not provided.