Frequently asked questions – HONDA 2008 Ridgeline 31SJC8100 User Manual
Page 114
Navigation System
113
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
Verify the following: The display mode in Setup is set to Auto, the dash
brightness is not set to maximum, and Map Color in Setup is set to Black
for Night. See Display on page 72.
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
Verify the following: The display mode in Setup is set to Auto, and Map
Color in Setup is set to White for Day. See Display on page 72.
During the day, I turned on the lights because it started to
rain, but the screen went dark. How can I make it still display
day mode?
Adjust the dash brightness (+) button to full brightness. Remember to set it
back to a medium setting, or at night, the screen will be bright. See Display
on page 72.
How can I input my destination using map coordinates?
The navigation system was not designed for this. However, you can view
the coordinates of an address by touching the vehicle position icon on the
map. See Map Screen Legend on page 47.
How do I change or remove my PIN?
Go to “Personal Information” in the Setup screen (second), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN. You then
have the choice to change or remove the PIN. See page 78.
I forget the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
PINs are optional. See information regarding PINs on page 78. Your dealer
can reset the PIN for you.
Problem
Solution
Frequently Asked Questions