Havis-Shields Kwik-Kit KK-100-06 - Manual (Page 16)

KK-XXX-06_INST_8-07 16
Top Passenger-Side rear Top Driver-Side rear
Item #6
Approximately 3”inches
Item #6
3” inches
Item #7 to #1 Item #6 Item #6
Position Driver-side Ceiling section to
mate with Bench/Wall assembly. Pre-
drill 5/32” holes into Ceiling, using
Bench/Wall assembly holes as a guide.
With unit positioned according to measurements on previous page, pre-
drill and attach a #10 x 1” sheet metal screw to hold the rear Bulkhead in
place while assembling the remainder of the unit.