Husqvarna 230 ACX - Manual (Page 12)

English - 13
2. PRESENTATION
Working method
Automower automatically mows the lawn.
It continuously combines mowing and charging.
The charging station sends out a signal that
Automower can sense at a distance of 6 - 7 metres.
The mower starts to search for the charging station
when the battery charge becomes too low.
Automower does not mow when it is searching for the
charging station.
When Automower searches for the charging station it
uses one or more of three different search methods:
Irregular, Follow boundary wire and Follow guide
wire
. For more information about the search
methods, see 2.3 Search method on page 15 and
Follow loop in (3-2-2) on page 53.
When the battery is charged the mower reverses,
turns around and leaves the charging station in a
randomly selected direction within the exit sector
90° - 270°.
To make it easier for Automower to reach all parts of
the garden you can manually set how the mower will
leave the charging station, see 6.5 Garden (3) on
page 49.
When Automower body hits an obstacle, the mower
reverses and selects a new direction.
Two sensors, at the front and back on Automower,
sense when the mower approaches the boundary
wire. Automower overruns the wire by up to
27 centimetres before it turns. The overrun length
can be set, see Drive past wire (3-4-2) on page 57.
3012-510
3012-511
3012-693