Husqvarna 230 ACX - Manual (Page 20)

English - 21
3. INSTALLATION
3. Connect the low voltage cable to the charging
station.
Only use original cable and transformer.
4. Connect the low voltage cable to the
transformer.
The connectors may be slightly difficult to
connect, as they are moisture-proof.
5. Connect the transformer’s power cord to a 230V
wall socket. It is preferable to use an earth-fault
breaker as recommended.
IMPORTANT INFORMATION
Do not tread or walk on the charging station
plate.
3012-263
3012-262
3012-533