HTC Pro2 - Manual (Page 128)

118 Section 2J. Managing Your Device
Changing Basic Settings
Display Settings
To manually adjust the screen brightness:
1. Tap Start > Settings > All Settings .
2. On the System tab, tap Power > Backlight tab.
3. Clear the Auto adjust backlight check box.
4. Adjust the brightness by dragging the slider under On battery power and On external power .
To set the backlight to dim after a time delay:
1. Tap Start > Settings > All Settings .
2. On the System tab, tap Power > Advanced tab.
3. In On battery power and On external power , select the Turn off backlight if device is not used for check box, and
then specify the time delay.
To increase or decrease the size of text on the screen:
1. Tap Start > Settings > All Settings .
2. On the System tab, tap Screen > Text Size tab.
3. Move the slider to increase or decrease the text size.
To recalibrate the touch screen:
The device touch screen is calibrated before shipment. Recalibrate the touch screen if it does not accurately
respond to screen taps.
1. While the device is on, press and hold the Volume Up and Volume Down buttons at the same time, and
then tap the screen with the stylus to open the align screen.
2. Follow the onscreen instructions to complete the calibration.
Device Name
The device name is used to identify your device when synchronizing with a computer, connecting to a
network, or restoring information from a backup.
To change the device name:
1. Tap Start > Settings > All Settings .
2. On the System tab, tap About > Device ID tab.
3. Enter the device name.
Note If you synchronize multiple devices with the same computer, each device must have a unique name.
Notes • The device name must begin with a letter, consist of letters from A to Z , numbers from 0 to 9 , and cannot
contain spaces. Use the underscore character to separate words.
• If you enroll your device to your company’s domain, the device name will be changed to be the same as the
one used to enroll the device.