HP T3304 - Manual (Page 34)

OFFLINE
IGP/PGL
USER CONFIG
PAPER CONTROL
USER CONFIG
PRINTER CONTROL
PRINTER CONTROL
Media Handling
Selecting Media Handling
26 Operator’s Guide
The options for this selection are as follows:
•
SELF STRIP – selects the self strip option.
When the label present sensor is
installed and enabled, the printer can
be configured for “one up” printing.
•
CUTTER selects the cutter mechanism
option.
The cutter must be installed to use this
option.
•
TEAR OFF –selects the tear off option.
•
CONTINUOUS – selects the continuous
feed option.
1
Press ON LINE/PAUSE to place the
printer in the off line mode.
2
Press to enter the configuration
menus.
3
Press to reach the printer control
menu.
4
Press to enter the printer control
menu.