HP T3304 - Manual (Page 40)

fault messages
32 Operator’s Guide
Paper Jam
Possible causes:
•
Improper media.
•
Actual label length greater than
programmed label length.
Paper Empty
Printer is out of media stock.
Media Fault
The ribbon system detected a fault.
Possible causes:
•
Out of ribbon.
•
Ribbon motion was stopped.
•
Obstructions in the media movement.
•
Paper motion stopped.
Cutter Fault
The cutter operation failed.
Possible causes:
•
Cutter is jammed.
•
Defective cutter hardware.
Ribbon Saver Fault
Ribbon saver operation failed.
Possible causes:
•
Obstruction in ribbon area.
•
Defective ribbon saver hardware.
Printhead Test Fail
The printer has detected a failure in one or
more printhead dots.
PAPER JAM
PAPER EMPTY
MEDIA FAULT
CUTTER FAULT
RIBBON SAVER FAULT
PRINTHEAD
TEST FAIL