Heat & Glo Fireplace VRTIKL-AU - Manual (Page 25)

25 Heat & Glo • VRTIKL-AU • 2123-900 • 7/07
7. Install the cover plate with gasket to the top of gas stove
with screws previously removed (Figure 7.10).
Figure 7.10
ON BACK OF APPLIANCE:
6. Remove the four screws from the cover plate on rear
of gas stove. Set cover plate aside. Retain screws.
(See Figure 7.9). Attach DV adapter collar in its
place. Install the inner extension collar.
Figure 7.9
ON TOP OF APPLIANCE:
8. Install the new back panel (without hole) to the rear of
gas stove. Replace the Allen head screws removed
in Step 3 to hold the back panel in place.
9. Install the new top as shown in Figure 7.11.
Figure 7.11
I INNER EXTENSION COLLAR NNER EXTENSION COLLAR