Heat & Glo Fireplace VRTIKL-AU - Manual (Page 26)

26 Heat & Glo • VRTIKL-AU • 2123-900 • 7/07
G. Positioning the Logs
Figure 7.14
Place log #1 into the cradle in the burner. Lean the log
back towards right corner of firebox.
While still breakable, the logs do not become fragile until
after the gas stove is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
PLEASE NOTE: Logs have been designed to work
specifically with the burner of this gas stove. Exact
placement will ensure proper operation of your gas
stove.
Figure 7.15
Locate log #2 over the pin in log #1 and into notch in log
#1. Lean the log back toward the left corner of the fire-
box.
Figure 7.13
H. Placing Mineral Wool
Apply 15 mm size pieces sparingly along ports as shown.
Do not block ports.
Figure 7.16
Explosion Risk.
• Follow ember placement instructions in manual.
• Do NOT place embers directly over burner ports.
• Replace ember material annually.
Improperly placed embers interferes with proper burner
operation.
WARNING