Homelite UT905011 - Manual (Page 6)

Page 2 — English
 Introduction .................................................................................................................................................................... 2
 Important Safety Instructions .....................................................................................................................................3-4
 Specific Safety Rules ..................................................................................................................................................... 4
 Symbols ......................................................................................................................................................................5-7
 Electrical .....................................................................................................................................................................8-9
 Features ...................................................................................................................................................................... 10
 Assembly ................................................................................................................................................................11-12
 Operation ................................................................................................................................................................12-13
 Maintenance ...........................................................................................................................................................14-16
 Troubleshooting ........................................................................................................................................................... 17
 Warranty ..................................................................................................................................................................18-20
 Parts Ordering / Service..................................................................................................................................Back Page
This product has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product, making it easy to maintain and operate.
DANGER:
GROUNDING THE GENERATOR
To reduce the risk of shock or electrocution, generator must be properly ground-
ed. The nut and ground terminal on the frame must always be used to connect
the generator to a suitable ground source. The ground path should be made with
#8 size wire. Connect the terminal of the ground wire between the lock washer
and the nut, and tighten the nut fully. Connect the other end of the wire securely to
a suitable ground source.
The National Electric Code contains several practical ways in which to establish a good ground source. If a steel or iron
rod is used, it should be at least 5/8 in. diameter, and if a nonferrous rod is used, it should be at least 1/2 in. diameter
and be listed as material for grounding. Drive the rod or pipe to a depth of 8 ft. If a rock bottom is encountered less than
4 ft. down, bury the rod or pipe in a trench.
All electrical tools and appliances operated from this generator must be properly grounded by use of a third wire or
be “Double Insulated.”
It is recommended to:
1. Use electrical devices with 3-prong grounded plugs.
2. Use an extension cord with a 3-pole receptacle and a 3-prong plug at opposite ends to ensure continuity of the
ground protection from the generator to the appliance.
Check and adhere to all applicable federal, state, and local regulations relating to grounding specifications. Consult a
qualified electrician or service personnel if the grounding instructions are not completely understood or if in doubt as
to whether the generator is properly grounded.
TABLE OF CONTENTS
INTRODUCTION