Horizon Fitness E401 - Manual (Page 7)

BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
HORIZON
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
HORIZON WARRANTY
IMPORT
ANT
PRECAUTIONS
ASSEMBLY STEP 
NOTE: There is NO hardware bag for this step.
All hardware is pre-installed.
Attach the CONSOLE MAST wires to the
CONSOLE.
Carefully tuck the CONSOLE WIRES into
the CONSOLE MAST before attaching the
CONSOLE.
Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
CONSOLE first).
A
B
C
YOU’RE FINISHED!
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
AC ADAPTOR INPUT
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet.
* NOTE: Be careful
not to pinch
any wires while
installing the
console.
ASSEMBLY STEP 
FRONT HANDLEBAR COVER
BACK HANDLEBAR COVER
UPPER HANDLEBAR
LOWER HANDLEBAR
WATER BOTTLE HOLDER
PRE-ATTACHED SCREWS
CONSOLE MAST
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
Attach WATER BOTTLE CAGE to CONSOLE MAST using PRE ATTACHED SCREWS.
Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.
Note the position of the snap tabs on the covers before snapping into position.
Repeat on other side.
A
B
C
E401_Rev.1.5.indd 12-13 2/29/08 10:05:40 AM