Hitachi DZ-HS500SW User Manual

Page 106

Advertising

En
g

lish

106

UPDATING CONTROL INFORMATION OF HDD/DVD-RAM/DVD-RW (VR-
MODE) (UPDATE CONTROL INFO.)

Disc Navigation in this DVD video camera/recorder handles information on scenes, such as
thumbnail, skip, fade, in a particular manner. If you use another device to edit a disc recorded on this
DVD video camera/recorder, and then use the data again with Disc Navigation in this DVD video
camera/recorder, the Disc Navigation may not appear normally. If this happens, use the Update
Control Info function to update the data.

Press the DISC NAVIGATION button.

Press the MENU button.

Use the 2/1/0/// buttons to
choose “Update Control Info.” on the “HDD
Setting” or “DVD Setting” menu screen, and
then press the button.

The screen for verifying “Update Control
Information” will appear.

Choose “YES”, and then
press the button.

The message for
proceeding will appear,
and then the Disc Navigation menu screen
will be restored.
A black screen may appear while the message
for updating is displayed.
Choose “NO” to cancel updating.

Note

• It may take time to update the control information if

the HDD/disc has many recorded scenes.

• Even if control information is updated, some discs will

be unusable on Disc Navigation of this DVD video
camera/recorder.

DELETING DATA ON HDD (FULL FORMAT)

Executing “Format HDD” in “HDD Setting” to delete data on HDD will only change the file control
information: It will not delete the data completely. When discarding or transferring this DVD video
camera/recorder, be sure to delete any personal data on the HDD in order to prevent it from leaking out.

Press the DISC NAVIGATION button, and
then the MENU button.

Use the 2/1/0// buttons to choose
“HDD Setting”, “Full Format”, and then press
the button: The “HDD Full Format”
screen will appear.

Choose “YES”, and then press the button.
The HDD will be completely cleared.
To cancel clear, choose “NO”: The Disc
Navigation screen will be restored.

Note

• Pressing the

(STOP/EXIT) button during full

formatting will stop the formatting. Take care,
however: Even if full formatting stops midway, all data
on HDD will be deleted.

Before You Begin

• When using the AC adapter/charger to power the DVD video camera/

recorder for updating control information, make sure that power is not
turned off during updating. If the DVD video camera/recorder is turned
off during updating and the updating is interrupted, the control
information will not be updated correctly.

HDD

ENTER

U p d a t e C o n t r o l I n f o r m a t i o n ?

U p d a t e C o n t r o l I n f o r m a t i o n

YES

Before You Begin

• Use the AC adapter/charger to power the DVD video camera/recorder when

completely deleting the data on the HDD: This is not possible with a battery.

• If power is turned off and Full Format is interrupted midway, normal

deletion will not be possible.

• Executing Full Format will delete all data on the HDD. Save any

important data on DVD before starting complete deletion.

• It will take approx. 40 minutes for complete deletion: In rare case, it may

take more than one hour.

HDD

Advertising