Finalising dvd-rw/dvd-r/+rw (finalize dvd), Using finalize button to finalise a disc, Before you begin – Hitachi DZ-HS500SW User Manual

Page 107: Finalize, En g lish, Press the disc navigation button, Press the menu button

Advertising
background image

En

g

lish

107

 

FINALISING DVD-RW/DVD-R/+RW (FINALIZE DVD)

If you want to play back a DVD-RW/DVD-R recorded/dubbed on this DVD video camera/
recorder, using a device conforming to 8 cm DVD disc – such as a DVD recorder/player, etc. – you
must finalise the disc on this DVD video camera/recorder.
If you wish to display the DVD video menu when playing back a +RW on a DVD player or DVD
recorder, finalise it using the Disc Navigation menu.
No further recording/dubbing can be done on a finalised DVD-RW (VF-mode)/DVD-R/+RW. You can,
however, unfinalise the DVD-RW (VF-mode)/+RW so that other scenes can be recorded/dubbed on it.
Additional recording/dubbing is possible on a finalised DVD-RW (VR-mode): Unfinalising is not necessary.

1

Press the DISC NAVIGATION button.

2

Press the MENU button.

3

Use the 2/1/0/// buttons to
choose “Finalize DVD” on the “DVD Setting”
menu screen, and then press the  button.

The disc will be finalised.

4

Choose “YES”, and then
press the  button.
The message showing
that the disc is being
finalised will appear,
and the disc will then be
finalised.

5

When finalisation is complete, the Disc
Navigation screen of all programmes will
appear.
' will appear on the Disc Navigation screen
for a finalised disc.

Note

:

• Do not use any other device to finalise a disc

recorded/dubbed on this DVD video camera/recorder.

• If the disc in the DVD video camera/recorder has

already been finalised, you cannot choose “Finalize
DVD”.

• The time required to finalise disc that appears on the

“Finalize DVD” screen is only for reference.

• The shorter the recording time on disc, the longer it

will take to finalise it.

• The second and later finalisation will be faster with a

disc which has previously been finalised.

●Using FINALIZE button to finalise

a disc

Press the FINALIZE button during recording
pause: The screen shown in step 4 above will
appear. Choose “YES”, and then press the 
button: Finalising will start.

Before You Begin

• Be sure to use the AC adapter/charger to power the DVD video camera/

recorder when finalising a DVD-RW/DVD-R/+RW. Finalisation cannot be
executed using a battery. If the DVD video camera/recorder is turned off
during finalisation and the finalisation is interrupted, incorrect
finalisation will result, and at worst, the disc may be damaged.

ENTER

F i n a l i z e ? ( A p p r o x . 3 m i n . )

F u r t h e r r e c o r d i n g o n t h i s
D V D w i l l b e i m p o s s i b l e .

F i n a l i z e D V D

YES

NO

* 1

* 2

*1 Displayed only when

a DVD-R is used.

*2 Will vary depending

on the recording
time.

0 01/ 01 5

A l l P r o g r a ms

PLAY PHOTO SELECT

TOP

PREV

NEXT

END

001 / 010

1 / 3 / 2 0 0 7

8 : 0 0 : 0 0

5 / 3 / 2 0 0 7

8 : 0 0 : 0 0

7 / 3 / 2 0 0 7

1 0 : 0 0 : 0 0

1 0 / 3 / 2 0 0 7

1 0 : 0 0 : 0 0

1 5 / 3 / 2 0 0 7

8 : 0 0 : 0 0

1 8 / 3 / 2 0 0 7

8 : 0 0 : 0 0

2 0 / 3 / 2 0 0 7

1 0 : 0 0 : 0 0

2 3 / 3 / 2 0 0 7

1 0 : 0 0 : 0 0

Screen when viewed on DVD recorder/player
(DVD-RW (VF-mode)/DVD-R/+RW)

Finalised disc

FINALIZE

Advertising