HP BA322 90087 - Manual (Page 276)

HP SIM displays the Integrity servers to be provisioned.
You can configure TCP/IP on up to eight Integrity servers at a time.
3. Verify the target servers that you have selected, and click Run Now.
4. On the subsequent page, provide the following information for each Integrity server being
provisioned:
•
MP Login Credentials: This information is used to login to the MP console of the target
server to configure TCP/IP. The default values for the user name and password is Admin.
• OpenVMS System Login Credentials: This information is used to login to OpenVMS
running on the target server to configure TCP/IP.
After you have provided the MP login and OpenVMS system login credentials for a server,
and move the cursor focus away from the credentials, provisioning automatically accesses
the server and fetches the TCP/IP network interfaces in the link-up state. During this
process, a message as shown in the figure below is displayed.
276 Using HP SIM and vMedia for Provisioning OpenVMS