Hitachi CP-X267 - Manual (Page 64)

64
4 . Management with Web browser software
Configuring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
(67)
E-mail Alerts
The projector can automatically send an alert to specified e-mail addresses when
the projector requires maintenance or has encountered an error.
(89)
Projector Management using SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specified PC.
(91)
Event Scheduling
You can schedule the projector to perform various functions according to the date
and time.
(92)
e-SHOT (Still Image Transfer) Display
The projector can display still images that are transferred via the network.
(95)
Command Control via the Network
The projector can be controlled using RS-232C commands over a network.
(96)
4. Management with Web browser software
This projector is equipped with the following network functions by using a web
browser software.