Hobart Welding Products OLYMPIC R-115 - Manual (Page 16)

OM-193 471 Page 12
2-7. Installing Wire Guide And Drive Roll
802 310-A
1 Inlet Wire Guide
2 Intermediate Wire Guide
Install and secure inlet wire guide,
and intermediate wire guide.
3 Drive Roll (4)
Install drive rolls and turn drive roll
nut one click.
During maintenance intervals,
remove drive rolls, and clean
grooves using a wire brush. Check
groove of drive roll for pitting or
increase in the depth of the groove
indicating drive roll is worn out.
Tools Needed:
3/8 in
1
2
3