HP STORAGEWORKS SSL1016 User Manual

Page 133

Advertising
background image

Troubleshooting

133

SSL1016 Tape Autoloader Reference Guide

3C

Over temp

■

Verify that room temperature is within

specifications.

■

Check that there is adequate clearance for airflow.

■

Clear debris from any openings of the autoloader,

both in the front and the back.

■

Verify that both fans are working. If fans are bad,

contact HP customer support.

■

Power off the autoloader and allow it to cool.

3D

Drive error

Try a different piece of media. If that also fails, contact

HP customer support.

3E

Load error

■

Verify you are using the correct type of media.

■

Verify cartridge does not have labels or other

matter placed anywhere on the cartridge except

where labels are expected to be placed.

■

Try to load a different piece of media. If multiple

pieces of media fail, contact HP customer support.

3F

Unload error

■

Verify cartridge does not have labels or other

matter placed anywhere on the cartridge except

where labels are expected to be placed.

■

Try to load a different piece of media. If multiple

pieces of media fail, contact HP customer support.

60 - 69

Internal

communication

events

Power cycle the autoloader.

A0 - A4

Picker servo errors

■

Run Picker test.

■

Run Health test.

■

If problem continues, power cycle the autoloader

and repeat the tests.

Table 14: Error Messages

Error Message

Description

Suggested Repair

Advertising