HP STORAGEWORKS SSL1016 User Manual

Page 135

Advertising
background image

Troubleshooting

135

SSL1016 Tape Autoloader Reference Guide

A8

Destination element

full

■

Verify the expected destination really does not have

a cartridge.

■

If destination is a magazine, install and remove a

cartridge from the selected slot and try again. If

error continues, replace the magazine.

■

If destination is the tape drive verify the tape drive

does not have a cartridge.

■

If a cartridge is in the mailslot opening, remove it

and verify that the mailslot door is closed.

■

Power cycle the autoloader.

■

Set the autoloader to Home using Web

Administration, Command page.

■

Run the Health test.

■

If error continues, contact HP customer support.

A9

Picker full

■

Look in the front of the autoloader and confirm the

picker is full.

■

Power cycle the autoloader.

■

Run the Health test.

■

Set the autoloader to Home using Web

Administration, Command page.

■

Contact HP customer support if the problem

continues and prevents normal operations.

AA

Picker cartridge

sensor error

■

Perform picker test.

■

Perform the Health test.

■

If problem prevents the test from running, contact

HP customer support.

AB

Drive path sensor

error

■

Run the Health test.

■

Power cycle the autoloader.

AC

Mail slot door sensor

error

■

Insert a cartridge into the autoloader via the mail

slot.

■

Power cycle the autoloader.

Table 14: Error Messages

Error Message

Description

Suggested Repair

Advertising