Beeper pitch – good read, Beeper duration – good read, Led – good read – Honeywell 2020 User Manual
Page 64: Number of beeps – good read
3 - 2
Beeper Pitch – Good Read
The beeper pitch codes modify the pitch (frequency) of the beep the image
scanner emits on a good read.
Default = Medium.
Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the image scanner
emits on a good read.
Default = Normal.
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good
read. For example, if you program this option to have five beeps, there will be
five beeps and five LED flashes in response to a good read. The beeps and LED
flashes are in sync with one another. To change the number of beeps, scan the
barcode below and then scan a digit (1-9) barcode and the Save barcode on the
inside the back cover of this manual.
Default = One.
Low (1600 Hz)
* Medium (3250 Hz)
High (4200 Hz)
* Normal Beep
Short Beep
*LED - Good Read On
LED - Good Read Off
Number of Beeps/LED Flashes