Hobart Welding Products HANDLER 210 MVP - Manual (Page 24)

OM-249 498 Page 20
5-9. Multi−Voltage Plug (MVP) Connection
Selecting Plug
1
Power Cord Connector From
Welding Power Source
Select plug for power supply receptacle
available at site. Not all plugs shown are
provided as standard with unit.
2
Plug − NEMA Type 5−15P
3 Receptacle − NEMA Type 5−15R
(Customer Supplied)
4 Plug − NEMA Type 5−20P (Optional)
5 Receptacle − NEMA Type 5−20R
(Customer Supplied)
6 Plug − NEMA Type 6−50P
7 Receptacle − NEMA Type 6−50R
(Customer Supplied)
! Follow electrical service guide for
230 VAC in Section 5-7. Do not use
plug rating to size branch circuit
protection.
Connecting Plug To Power Cord
Align arrow on plug with arrow on power
cord connector. Push together.
Tighten threaded collar. As threaded collar
is tightened, push plug onto adapter until
collar is completely tight.
Connect plug to receptacle.
MVP Plug1 2010−10 / Ref. 805 390-C
! Do not cut off power cord connector and
rewire. The power cord connector and
plugs will work with standard NEMA
receptacles. Modifying power cord,
connector, and plugs will void product
warranty.
3
2
7
4
5
6
1
Selecting Plug
Connecting Plug To Power Cord