HP CM3530 - Manual (Page 225)

7. Look for paper in the Tray 2 roller area. Near the bottom of the right side, squeeze the two green
levers upward to release the jam-access door. Remove any jammed paper, and close the door.
8. If paper is visible entering the bottom of the fuser, gently pull downward to remove it.
CAUTION: Do not touch the rollers on the transfer roller. Contaminates can affect print quality.
9. Paper could be jammed inside the fuser where it would not be visible. Remove the fuser to check
for jammed paper inside.
CAUTION: The fuser can be hot while the product is in use. Wait for the fuser to cool before
handling it.
a. Grasp the fuser handles, lift up slightly, and pull straight out to remove the fuser.
ENWW Jams 211