Enww print quality menu 51 – HP CM3530 User Manual
Page 65
Menu item
Sub-menu item
Values
Description
Full Calibration
Calibrate
Performs all product calibrations.
Delay Calibration at
Wake/Power On
No
Yes
(default)
This menu controls the timing of the calibration when
the printer wakes up or is turned on.
●
Select
No
to have the printer calibrate immediately
when it wakes up or is turned on. The product will
not print any jobs until it finishes calibrating.
●
Select
Yes
to enable a product that is asleep to
accept print jobs before it calibrates. The product
only accepts new jobs for a short time. It may start
calibrating before it has printed all the jobs it has
received.
NOTE:
For the best results, allow the product to
calibrate before printing. Print jobs performed before
calibration may not be of the highest quality.
Table 2-16
Print Quality menu (continued)
ENWW
Print Quality menu
51