HP Home Theater System - Manual (Page 154)

148 HP Digital Entertainment Center
9 Click Yes to apply the settings. The screen may
flicker for a few seconds while the settings change.
If the new setting is not correct, wait for 15 seconds
and the previous screen will display.
10 Click Finish.
DVD Playback
You may have to perform the Adjusting the Desktop
Display procedure before and after playing a commercial
DVD video in component video, due to copy protection
measures.
To play a commercial DVD video in component video, the
resolution format must be set to 480i or 480p. The DVD
will not play after it is inserted into the drive, and you
may see an error message when you try to play the DVD
in component video and the resolution format is set above
480i or 480p.
To play a commercial DVD video, in component video, in
Media Center:
1 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2 Click More Programs, HP Settings, and then
Video Settings.
3 Click DVD Mode (480p). (Select this mode only if
your TV supports 480p mode.)
4 After playing the commercial DVD video in
component video, perform the Adjusting the Desktop
Display procedure to return the desktop image and
Media Center to a higher resolution format. See
“Adjusting the Desktop Display” on page 144.
n
You may also need to perform the HDTV
Overscan procedure, depending on the type
of TV/display and video connection.
n
You may have to perform the “Adjusting the
Desktop Display” procedure before and after
playing a commercial DVD video in
component video, due to copy protection
measures.