HP Home Theater System - Manual (Page 88)

82 HP Digital Entertainment Center
Antenna (NTSC and ATSC)
HDTV and standard signal source — TV antenna
DIGITAL VIDEO OUT
DVI
DIGITAL AUDIO
OUT
COAXIAL
OPTICAL
10/ 100/ 1000
HI SPEED USB 2.0 ETHERNET 1394
AUDIO IN
R
L
AUDIO 7.1 PRE-OUT
SURROUND
BACK
SURROUND CENTER
SUB
WOOFER
FRONT
R R R
L L L
VIDEO OUT
S-VIDEO COMPONENT
VIDEO
Y
Pb
VGA
Pr
INFRARED TRANSMITTER OUT
1 2
WIRELESS LAN 802.11 b/g
REMOVABLE ANTENNA ACTIVITY
LINK
TV SOURCE 1 IN
VIDEO AUDIO S-VIDEO
R L
CABLE/ANT. IN FM ANTENNA IN
1
DTV
AC IN
100-240V- 4/A 50/60Hz
TV SOURCE 2 IN
S-VIDEO AUDIO R L
Roof Antenna
Coaxial
Splitter 2 Way Splitter
VHF
Antenna
UHF
Antenna
If you are using a VHF and UHF broadcast television
antenna (sold separately) with no cable TV box, digital
cable box, or satellite receiver, do the following to
connect the NTSC and ATSC TV signal source to your
HP Digital Entertainment Center:
1 Install a splitter (provided) as shown in the following
illustration (select models only). Connect the splitter
input to the antenna (outdoor shown).
2 Connect two coaxial cables to the splitter outputs.
Turn the connectors to tighten them.
3 Connect a coaxial cable into the Cable/Ant.
In connector on the back of the HP Digital
Entertainment Center. Turn the connector to
tighten it.
4 Connect a coaxial cable into the
HDTV/SDTV Ant. In connector on the
back of the HP Digital Entertainment
Center. Turn the connector to tighten it.
CABLE/ANT. IN
DUAL
TUNER
HDTV / SDTV ANT. IN
ATSC TUNER