HP Home Theater System - Manual (Page 170)

164 HP Digital Entertainment Center
System
Find the description that most closely matches your
problem, and try the corresponding solution.
Problem Solution
My HP Digital
Entertainment Center
won’t turn on at all. ■ When you press the On button on the front of the HP Digital Entertainment
Center, the following events should happen:
a The HP On/Standby (power) button should light and the front display
should light up.
b The hard disk drive and fans spin.
c The HP Digital Entertainment Center makes one beep, indicating it is
operating properly.
■ If the HP Digital Entertainment Center doesn’t go through the previous
procedure, check the following:
a The power cord and all cables are securely plugged into the HP Digital
Entertainment Center.
b The power cord is plugged into a grounded outlet. Check to see whether
the outlet works by plugging another item into it.
c Look inside the rear fan. If you see a green LED, then AC power is
available.
d The TV or monitor is connected to the HP Digital Entertainment Center,
plugged in, and turned on.
e Make sure that the HP Digital Entertainment Center is not too hot, and that
vents are not blocked.
I installed a new printer
or other device, and it
won’t work. ■ Be sure that you installed the device drivers that came with the new device.
■ You may need an updated driver for Windows XP. For non-HP peripherals,
contact the vendor directly. For HP peripherals, visit the HP Web site. Refer to
the Warranty and Support Guide for details.