Philips QC 5099 - Manual (Page 7)

electromagnetic fields (eMF)
This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Charging
Charge the appliance for 12 hours before you start using it for the first
time.
A fully charged appliance has a cordless clipping time of up to 50 minutes.
Do not charge the appliance for more than 4 hours.
1 Make sure the appliance is switched off while charging.
 Insert the appliance plug into the appliance (Fig. ).
 Insert the adapter into the wall socket.
The charging light goes on to indicate that the battery is being
charged.
The charging light does not go out or change colour when the
appliance is fully charged.
optimising the lifetime of the battery
After the appliance has been charged for the first time, do not recharge it
between clipping sessions. Continue using it and recharge it only when
the battery is (almost) empty.
Discharge the battery completely twice a year by letting the motor
run until it stops.
Do not keep the appliance plugged into a wall socket all the time.
If the appliance has not been used for a long time, it must be
recharged for 12 hours.
,
-
-
-
English 7