Husqvarna 45-0352 - Manual (Page 10)

10
STEP 22 - ATTACH SWEEPER TO TRACTOR
FIGURE 26
1. Place the tractor and sweeper on a fl at level surface.
2. Set the sweeper height adjustment handle to about the
middle of its adjustment range.
3. Attach the sweeper hitch to the tractor hitch, arranging
the hitch spacers in one of six possible combinations as
shown in GROUP A and GROUP B diagrams below.
IMPORTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximately level with the ground and approximately 5" to
7" off the ground as shown in fi gure 26.
GROUP "B" - For vehicles with hitches
having 10" to 13" ground clearance. GROUP "A" - For vehicles with hitches
having 8" to 10" ground clearance.
APPROXIMATELY LEVEL
(5" to 7" FROM SURFACE)
BRUSH HEIGHT ADJUSTED
APPROXIMATELY MID-WAY
BLACK LINE IS TRACTOR HITCH
HITCH BRACKET MOUNTED
BELOW HITCH TUBES
BLACK LINE IS TRACTOR HITCH
HITCH BRACKET MOUNTED
ABOVE HITCH TUBES