Finalizing dvd-rw/dvd-r/+rw disc (finalize disc), Using finalize button to finalize a disc, Before you begin – Hitachi DZ-GX5020A User Manual

Page 100: English, Press the disc navigation, Press the menu button

Advertising
background image

English

100

<>2/

FINALIZING DVD-RW/DVD-R/+RW DISC (FINALIZE DISC)

If you want to play back a DVD-RW/DVD-R disc recorded on this DVD video camera/recorder,
using a device conforming to 8 cm DVD disc – such as a DVD recorder/player, etc. – you must
finalize the disc on this DVD video camera/recorder.
If you wish to display the DVD video menu when playing back a +RW on a DVD player or DVD
recorder, finalize it using the Disc Navigation menu.
No further recording can be done on a finalized DVD-RW (VF-mode)/DVD-R/+RW. You can,
however, unfinalize the DVD-RW (VF-mode)/+RW so that other scenes can be recorded on it.
Additional recording is possible on a finalized DVD-RW (VR-mode): unfinalizing is not necessary.

1

Press the DISC NAVIGATION .

2

Press the MENU button.

3

Use the f/e/d/c/A buttons to
choose “Finalize Disc” on the “Disc” menu
screen, and then press the A button.

The disc will be finalized.

4

Choose “YES”, and then
press the A button.
The message showing
that the disc is being
finalized will appear,
and the disc will then be
finalized.

5

When finalization is complete, the Disc
Navigation screen of all programs will appear.
U will appear on the Disc Navigation screen
for a finalized disc.

Note

:

Do not finalize a disc recorded on this DVD video

camera/recorder using any other device.

If the disc in the DVD video camera/recorder has

already been finalized, you cannot choose “Finalize
Disc”.

The time required to finalize disc that appears on the

“Finalize Disc” screen is only for reference.

The shorter the recording time on disc, the longer it

will take to finalize it.

The second and later finalization will be faster with a

disc which has previously been finalized.

Using FINALIZE button to finalize

a disc

Press the FINALIZE button during recording
pause: The screen shown in step 4 above will
appear. Choose “YES”, and then press the A
button: Finalizing will start.

Before You Begin

Be sure to use the AC adapter/charger to power the DVD video camera/

recorder when finalizing a DVD-RW/DVD-R disc. Finalization cannot be
executed using a battery. If the DVD video camera/recorder is turned off
during finalization and the finalization is interrupted, incorrect
finalization will result, and at worst, the disc may be damaged.

ENTER

F i n a l i z e ? ( A p p r o x . 3 m i n . )

F u r t h e r r e c o r d i n g o n t h i s
d i s c w i l l b e i m p o s s i b l e .

F i n a l i z e D i s c

YES

NO

*

*

1

2

*

1

Displayed only when

a DVD-R is used.

*

2

Will vary depending

on the recording time.

0 01/ 01 5

A l l P r o g r a ms

PLAY

TOP

PREV

NEXT

END

001 / 010

1 / 5 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 1 0 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 1 2 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 1 6 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 2 0 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 2 5 / 2 0 0 7

8 : 0 0 : 0 0 A M

1 / 3 1 / 2 0 0 7

8 : 0 0 : 0 0 A M

2 / 2 / 2 0 0 7

8 : 0 0 : 0 0 A M

Screen when viewed on DVD recorder/player
(DVD-RW (VF-mode)/DVD-R/+RW)

Finalized disc

Advertising
This manual is related to the following products: