HP B1000 - Manual (Page 132)

132 Chapter 4
Field Replaceable Units
FRU Removal and Replacement
Figure 4-45. Installing the Floppy Disk Blank and Bracket
6. Slide the floppy disk blank and its bracket into the system unit chassis as shown in
Figure 4-45.
7. Tighten the two floppy disk bracket screws as shown in Figure 4-46..
Figure 4-46. Tightening the Bracket Screws
Floppy Disk
Bracket
Bracket Screw
Floppy Disk
Mounting Screws
(four, T-10)
Floppy Disk Blank
Bracket Screw
Bracket Screw