Cartridge supply upgrade, Older generation cartridge – HP 3070 B611 User Manual
Page 46
and install the SETUP cartridges to complete printer setup. After printer setup is complete, the printer can use regular
cartridges.
WARNING!
You must replace the orange caps on the regular cartridges you remove, or they will quickly dry
out. Some ink will still evaporate, but less than if the cartridges are uncapped. You can use the orange caps
from the SETUP cartridges if necessary.
.
Cartridge Supply Upgrade
Try to get the printer to recognize the supply upgrade cartridge.
1.
Remove the supply upgrade cartridge.
2.
Insert the original cartridge in the carriage.
3.
Close the access door, then wait until the carriage stops moving.
4.
Remove the original cartridge, then replace with the supply upgrade cartridge.
5.
Close the access door, then wait until the carriage stops moving.
If you still receive a supply upgrade problem error message contact HP support.
.
Older Generation Cartridge
You will need to use a newer version of this cartridge. To identify a newer version of the cartridge, look at exterior
of the cartridge package and find the Warranty Ends date.
If it says ‘v1’ several spaces to the right of the date, then the cartridge is the updated newer version.
.
Chapter 9
44
Solve a problem
Solve a problem