HP 3070 B611 - Manual (Page 9)

How do I? Instructions
Print wireless network test report.
The wireless network test report will display the diagnostics results for the
status of the wireless network, wireless signal strength, detected networks,
and more. 1. Press the Wireless button to display the
Wireless Menu.
2. From the Wireless Menu, select Print
Reports.
3. From the Print Reports menu select Wireless
Test.
View signal strength of wireless connection. 1. Press the Wireless button to display the
Wireless Menu.
2. From the Wireless Menu, select Connected
IP XXX.XXX.XX.XX.
3. Printer display will show wireless signal
strength.
Restore network settings to default settings. 1. Press the Wireless button to display the
Wireless Menu.
2. From the Wireless Menu, select Settings.
3. From the Settings menu, select Restore
Defaults.
4. Confirm selection to restore defaults.
Turn wireless on or off. 1. Press the Wireless button to display the
Wireless Menu.
2. From the Wireless Menu, select Wireless
Settings.
3. From the Settings menu, select Wireless On/
Off.
4. From the Wireless On/Off menu select On or
Off.
Establish a Wi-Fi Protected Setup (WPS) connection. WiFi Protected Setup (WPS – requires WPS
router) on page 33
Status Lights
• Wireless Status Light
• ePrint Status Light
• On Button Light
Wireless Status Light
Light behavior Solution
Off Wireless is off. Press Wireless button to access
wireless menu on the printer display. Use wireless
menu to enable wireless printing.
Slow blinking Wireless is on but not connected to a network. If
connection cannot be established, make sure
printer is within range of wireless signal.
Fast blinking Wireless error has occurred. Refer to messages on
printer display.
On Wireless connection has been established and you
can print.
(continued)
Status Lights 7
Get to k
now the H
P
All-in-One