Philips HD7751 - Manual (Page 11)

6 Press the STRENGTH button once or several times until the desired
coffee strength is selected (mild, medium or strong).
, The STRENGTH button lights up when you press it.
, The display shows the selected coffee strength.
7 Press the start/standby button to start the brewing process.
Keep away from the steam vent during brewing, as hot steam escapes
through the vent.
, The freshness indicator flashes on the display until the brewing
process is finished.
, The coffeemaker produces 5 beeps when the brewing process is
finished.
, The hotplate switches on automatically.
Do not touch the hotplate while it is on, as it gets hot.
8 Wait until the coffeemaker has stopped beeping before you remove
the jug from the hotplate.
Note: After brewing, coffee drips from the filter basket for several seconds.
, The freshness indicator is shown on the display for 30 minutes after
brewing, to indicate that the coffee is fresh.
9 If you do not need the hotplate to keep the coffee hot, press the
start/standby button to put the appliance in standby mode.
, The start/standby button stays on to indicate that the appliance is
still switched on.
Note: If you do not press the start/standby button to put the appliance in
standby mode, the appliance goes into standby mode automatically after 30
minutes. The start/standby button stays on to indicate that the appliance is still
switched on.
Note: You can press any button to activate the appliance and brew coffee
again.
10 If you do not intend to brew coffee again soon, set the on/off switch
on the back of the appliance to ‘O’ to switch off the appliance.
using pre-ground coffee
If you want to use pre-ground coffee instead of coffee beans, follow the
steps below.
1 Fill the water reservoir with water, as described in ‘Filling the water
reservoir’.
EnglisH 11