Honeywell 51130 Series - Manual (Page 4)

GENERAL DESCRIPTION OF FEATURES
A. Speed Control/Power Switch
B. Ionizer Control
C. Filter-Change Calendars
D. Ionizer Indicator Light
E. Power Indicator Light
F. Air Intake
G. Air Outlet
H. Base
I.
Locking Handle
Features
Replacement Filters
51130 Duracraft HEP-5020 Honeywell 38002
Model No.
HEPA Filter
Part Number
Carbon Pre-filter
Part Number
Replacement filters may be purchased from the retail store or ordered from the dealer
where you purchased the product. If you cannot locate one, please call our Consumer
Relations Dept. at (800) 332-1110 or e-mail us at: [email protected].
B
C
A
F
G
D
Operation
Step 1: Inspect Air Cleaner upon removal from its container. Remove and discard
any packaging material.
Step 2: Place the air cleaner on a flat, level, unobstructed surface. IF USING THE
IONIZER, DO NOT PLACE THE AIR CLEANER WITHIN THREE FEET OF
A N Y COMPUTER OR MAGNETICALLY SENSITIVE DEVICES SUCH A S
F L O P P Y DISKS OR TA P E S .
Step 3: Make sure that speed control is set to the OFF position. Plug in air cleaner.
Step 4: Set speed control to the “super” position. Allow the unit to operate for a few
minutes at “super”, then leave the control knobs in the “super” position for
f a s t e r, more powerful room cleaning, or move the knob to a lower setting for
quieter operation. Set Ionizer control to desired setting, O (Ionizer OFF) or I
(Ionizer ON).
E
The Ionizer charges particles in the air which may enhance the air cleaner’s
p e r f o r m a n c e .
H
I