Haan Floor Sanitizer SI-35 - Manual (Page 15)

Care & Maintenance
www.haanusa.com 877-HAAN DIRECT / 877-422-6347 pg 13
Always be sure that your floor
sanitizer is UNPLUGGED from
the wall receptacle prior to
cleaning or before emptying
the water tank.
1) Turn your Floor Sanitizer off and unplug the unit
from the electrical outlet.
2) Place the unit on the Floor Protector/Resting Mat.
3) Prepare to store the Floor Sanitizer by looping the
power cord around the pivoting cord wraps found
on the handle pole and snap the plug securely
onto the cord when complete.
4) Let your Floor Sanitizer cool for five (5) minutes
before removing the Ultra-Microfiber pad.
5) Always empty the water tank once you have
finished using your Floor Sanitizer.
6) Remove the Ultra-Microfiber pad and wash in
warm water with a mild detergent. Never use
bleach or fabric softener when cleaning the Ultra-
Microfiber pad. The Ultra-microfiber pad can be
washed in a washing machine set on the gentle
cycle. We recommend that you air dry the pads
for 24 hours, but they can also be dried in a
clothes dryer on a low heat setting.
7) To clean the body of your Floor Sanitizer wipe it
down with a damp cloth.
8) Store the unit upright in a protected dry area,
standing it on the Floor Protector/Resting Mat,
or by hanging it by the Storage Hook.
iMPortant
!
i
HELPFUL HAAN HINT:
Never leave the appliance in
one spot on any surface for any
period of time. Always place
your Floor Sanitizer on the Floor
Protector/Resting Mat when
stationary and make sure the
floor sanitizer is turned off not
in use.
CaUtion
!
i
Do not immerse your Floor
Sanitizer in water or any
other liquid.
HELPFUL HAAN HINT:
DO NOT use fabric softener
when washing the Ultra-
Microfiber Pads as this will
compromise the absorbancy
of the microfiber.