HP 263924-002 - Manual (Page 31)

Installing the IP Console Switch
2-14 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installing.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:13 PM
10. Position the front cover panel, and secure it to the front of the rack, using one
screw on each side.
100-24 0V , 1.0A , 50/60 Hz
T 2A, 250 VAC CA UTION :
Figure 2-15: Positioning the front cover panel
Configuring the IP Console Switch Hardware
To configure the IP Console Switch hardware:
1. Connect one end of a serial cable to an available COM port on the server that is
to be viewed locally from the IP Console Switch.
2. Connect the other end of the serial cable to the serial port on the
IP Console Switch.
3. Plug the supplied power cord in to the rear of the IP Console Switch and then in
to a valid power source.
4. Power on the IP Console Switch. The activity indicator on the rear panel powers
on. The activity indicator blinks for 30 seconds while performing a self-test.
Approximately 10 seconds after it stops blinking, press the Enter key to access
the main menu.