HP 263924-002 - Manual (Page 73)

Local Port Operation
6-22 HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: g-ch6 Local Port Operation.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:17 PM
Broadcasting Selected Servers
To broadcast selected servers:
1. From the Broadcast dialog box, select the keyboard and mouse checkboxes for
the servers that are to receive the broadcast commands.
-or-
Press the Up or Down Arrow keys to move the cursor to the target server. Then
press the Alt + K keys to select the keyboard checkbox and/or the Alt + M keys
to select the mouse checkbox. Repeat for additional servers.
2. Click OK to save the settings and return to the Setup dialog box. Click X or
press the Esc key to return to the Main dialog box.
3. From the Commands menu, select the Broadcast Enable checkbox to activate
broadcasting.
4. From the user station, enter the information and/or perform the mouse
movements you want to broadcast.
Activating Broadcasting
To activate or deactivate broadcasting, from the Commands menu, select or deselect
the Broadcast Enable checkbox.
Setting up a Scan Pattern
In Scan mode, the console switch automatically scans port to port (server to server).
You can select up to 16 servers from a list of all servers attached to your unit. You
can display the list by either server name or EID number by clicking the appropriate
button. Selecting the checkbox beside each server to be added to the scan list creates
the scan list. The creation of a scan list does not start Scan mode. You must enable
Scan mode through the Scan Enable checkbox on the Commands dialog box.