HP IPAQ RX3000 - Manual (Page 19)

15
To turn off Wi-Fi, tap the Wi-Fi button again. When Wi-Fi is off,
the Wireless LED is no longer blue and the Wi-Fi button turns
gray.
Battery-Saving Tip: When you are not using Wi-Fi, turn it off.
When Wi-Fi is on, be sure one of the power-saving modes is
selected. Refer to the section on “Changing the Wireless LAN Power
saving Modes” in the User’s Guide located on the Companion CD.
How Do I Use Wi-Fi?
Wireless access eliminates the need to use cables to connect your
HP iPAQ to the Internet. However, to be able to use Wi-Fi, you
must have a Wireless Access Point. These access points transmit
data to and from your wireless device. Your HP iPAQ can connect
directly to your wireless network through Wi-Fi. With Wi-Fi, you
can:
■ Access the Internet
■ Send and receive e-mail
■ Use hotspots for wireless connectivity
Setting Information
Before connecting to a network, you need to set up your HP iPAQ
with the necessary setting information for your network. The type
of information necessary to set up a network connection depends
on the type of network you are connecting to.
Option A: Home Wireless Network
If you have a wireless network in your home, you need to
determine the information you need to connect to the network.
Use whatever settings you specified when you installed your
wireless network to set up your HP iPAQ to connect to it.