HP IPAQ RX3000 - Manual (Page 8)

4
❏ If the CD doesn’t start automatically (auto run), click
Start > Run. Type D:\ (where D is the location of your
CD-ROM drive) in the Open: text box and click OK.
Double-click setup.exe to run the Setup program.
Note: The Experience HP iPAQ introduction demo automatically
starts after inserting the Companion CD into your personal
computer. This introduction demo highlights the things you can
do with your new HP iPAQ. To skip this introduction demo, click
Skip Introduction.
2. Select Start Here from the main menu and follow the
instructions on the screen.
To create an ActiveSync partnership between your HP iPAQ and
your personal computer, wait for the prompt.
3. When prompted, use the desktop cradle or sync cable to
connect your HP iPAQ and your personal computer as
follows:
❏ If you have an rx3700 series, connect the USB connector
to the USB port on your computer. Insert the HP iPAQ
into the desktop cradle. Connect the AC adapter to the
desktop cradle to charge it.
❏ If you have an rx3100 or rx3400 series, connect the sync
cable to the USB port on your computer and the other end
to the HP iPAQ. Connect the AC adapter to the sync cable
to charge it.