How do i stop dockware – HP IPAQ RX3000 User Manual
Page 57
 
53
Ä
CAUTION: Because most of the applications and data you install on 
your HP iPAQ are held in main memory, you need to reinstall them if 
the battery completely discharges or if the battery is removed from 
the unit for extended periods of time. The backup battery in your HP 
iPAQ lasts approximately 10 minutes or less.
You do not need to reinstall applications and data installed in the 
iPAQ File Store folder.
How Do I Stop DockWare?
DockWare is a personalized desk clock, calendar, and screensaver 
for your HP iPAQ. You can select preinstalled pictures to be used 
as a slideshow in the background or you can add your own 
personal pictures. For more information about DockWare, refer to 
the Special Features Guide or the DockWare help found on your 
HP iPAQ.
Note:
The DockWare program settings are turned on by default
and start after 5 minutes of inactivity on the HP iPAQ.
The application stops as soon as you touch the screen or push any 
button on the HP iPAQ, with the exception of scrolling up or 
down to view a picture. Also DockWare stops running if an alarm 
or any other popup window appears.
Be aware of the following:
■
If your HP iPAQ is running on battery power, this application 
does not automatically start.
■
If DockWare is running and you take your HP iPAQ out of the 
desktop cradle, the application continues to run on battery 
power until you turn off your device or DockWare.
To disable DockWare, tap and hold anywhere on the screen, and 
then uncheck Start Automatically from the popup menu. This 
menu item acts as a toggle switch to start and stop the DockWare 
software program. Therefore, if you want to start DockWare 
again, you need to select this option again.