Horizon Fitness HORIZON SERIES EX-56 - Manual (Page 7)

BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
HORIZON
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
HORIZON WARRANTY
IMPORT
ANT
PRECAUTIONS
ASSEMBLY STEP 
NOTE: There is NO hardware bag for this
step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the
CONSOLE wires .
B) Carefully tuck the CONSOLE MAST wires
into the CONSOLE MAST before attaching
the CONSOLE.
C) Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
YOU’RE FINISHED!
NUT (E)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (F)
60 mm
Qty: 2
SPACER (G)
44 mm
Qty: 2
TEFLON WASHER (H)
24 mm
Qty: 4
SCREW (L)
10 mm
Qty: 2
HARDWARE BAG FOR STEP 5 CONTENTS :
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
AC ADAPTOR INPUT
ASSEMBLY STEP 5
(CONTINUED)
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet. Locate the ON / OFF switch on the back of the CONSOLE. Flip the switch
to the ON position. After a “beep”, the CONSOLE will turn on.
* NOTE: Be careful
not to pinch
any wires while
assembling
the mast.
ASSEMBLY STEP 6
WATER BOTTLE HOLDER
PRE-ATTACHED SCREWS
CONSOLE MAST
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach WATER BOTTLE CAGE to CONSOLE MAST using PRE ATTACHED SCREWS.
EX-56_User_Guide_Rev.1.2.indd 12-13 3/29/07 11:55:43 AM