Assembly step, Assembly step  (continued) – Horizon Fitness ELITE SERIES 4.3E User Manual

Page 7

Advertising
background image

BEFORE

YOU
BEGIN

12

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ASSEMBL

Y

BEFORE

YOU
BEGIN

ELLIPTICAL

OPERA

TION

LIMITED

W

ARRANTY

TROUBLESHOOTING

&

MAINTENANCE

CONDITIONING

GUIDELINES

BEFORE YOU

BEGIN

ASSEMBL

Y

13

INTRODUCTION

IMPORT

ANT

PRECAUTIONS

ELLIPTICAL OPERA

TION

CONDITIONING GUIDELINES

TROUBLESHOOTING &

MAINTENANCE

LIMITED WARRANTY

ASSEMBLY STEP 

GUIDE RAIL

LOWER LINK ARM

SPACER

TEFLON WASHERS

LOWER

HANDLEBAR

LOWER LINK ARM

TEFLON WASHERS (O)

SPACER (P)

L0WER HANDLEBAR

NUT (Q)

BOLT (N)

A) Open

HARDWARE BAG FOR

STEP 6.

B) Insert

SPACER (P) into LOWER

LINK ARM.

C) Insert 2

TEFLON WASHERS (O)

between the

LOWER LINK ARM

and

LOWER HANDLEBAR.

D) Attach

LOWER LINK ARM to

LOWER HANDLEBAR using
BOLT (N) and NUT (Q).

E) Attach

INSIDE & OUTSIDE

ELBOW COVERS together using

2

SCREWS (R).

F) Repeat on other side.

NOTE: If you have difficulty

fitting the lower link arm into
the lower handlebar bracket,
slide the roller wheel forward
or backward on the guide
rail for better access to the
bracket.

BOLT (N)

60 mm

Qty: 2

SPACER (P)

44 mm axis

Qty: 2

NYLON

NUT (Q)

Qty: 2

TEFLON WASHER (O)

28 mm
Qty: 4

SCREW (R)

15 mm

Qty: 4

HARDWARE BAG FOR STEP  CONTENTS :

ASSEMBLY STEP  (CONTINUED)

PRE-ATTACHED
SET SCREWS

UPPER HANDLEBAR

LOWER HANDLEBAR

TAB

NOTCH

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A) Slide

UPPER HANDLEBAR onto LOWER HANDLEBAR and align NOTCH with TAB making sure handlebars are

joined together completely. Secure

UPPER HANDLEBAR to LOWER HANDLEBAR using PRE-ATTACHED SET

SCREWS.

B) Repeat on other side.

C) (For 4.3E only) Attach

WIRE from UPPER HANDLEBAR to WIRE from CONSOLE MAST.

D) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLEBARS. Note the position

ot the snap tabs on the covers before snapping into position. (On 4.3E, tuck wires inside of

HANDLEBAR

COVERS, CAREFUL not to pinch any wires).

E) Repeat on other side.

HANDLEBAR COVERS

UPPPER HANDLEBAR

SCREW (R)

SCREW (R)

INSIDE ELBOW COVER

OUTSIDE ELBOW COVER

UPPPER HANDLEBAR

UPPPER HANDLEBAR WIRE

CONSOLE WIRE

CONSOLE MAST

FOR 4.3E ONLY

2.3E-4.3E_Rev.1.9.indd 12-13

10/4/06 2:27:35 PM

Advertising
This manual is related to the following products: