HONDA RM752A - Manual (Page 15)

OPERATION
Safety is a primary concern in the design and
manufacture of our products. Unfortunately,
our efforts to provide safe equipment can be
wiped out by ,a single careless act of an
operator.
In addition to the design and configuration of
equipment, hazard control and accident
prevention are dependent upon the aware-
ness, concern, prudence and proper training of
personnel involved in the operation, transport,
maintenance and storage of equipment.
It has been said "the best safety device is an
informed, careful We ask you to be
that kind of an operator.
The operator is responsible for the safe operation of
this mower. The operator must be properly qualified
and trained. Operators should be familiar with the
mower, tractor and all safety practices before
starting operation. Read the safety information
on
pages 4 and 5.
This mower is designed for light brush shredding
and grass mowing. It is especially useful in cane,
berry,
grape and vegetable crops for mowing and
shredding prunings. It is equipped with low suction
blades. Optional high suction blades are available
for added suction and shredding.
Recommended mowing speed range for most
conditions is from two to five mph.
Do not allow children or unqualified persons
to operate equlpment.
Do not operate PTO durlng transport.
Keep bystanders away from equipment while
it is in operation.
Block mower securely before worklng under-
neath.
Keep all persons away from operator control
area while performing adjustments,
or maintenance.
No riders are allowed on tractor or mower.
Operate PTO at rpm maximum.
Never toward anyone.
Ensure shields and guards are properly
installed and
In good condition.
Ensure both slde sklds, the left slde shield
and either the dlscharge chute or right slde
shleld are installed.
Make certain all movement of mower
components has stopped before opening
blade access cover.
Stop mower and tractor lmmedlately upon
striking an obstructlon. Turn off engine,
remove key, Inspect and repair any damage
before resumlng operation.
Always wear tlght and belted
clothing to avold entanglement In movlng
parts. Wear sturdy, rough-soled work shoes
and protective equlpment for eyes, hands,
hearing and head.
F-7756 13