Horizon Fitness E901 - Manual (Page 17)

Be
FO
re
YOU
Be
GiN
2
iNT
rODUC
TiON
im
PO
rT
ANT
Pre
CA
UT
iONS
AS
Sem
BL
Y
Be
FO
re
YOU
Be
GiN
eLL
iP
TiC
AL
OP
er
AT
iON
Limi
Te
D
W
Arr
ANTY
COND
iT
iON
iNG
GU
iD
eL
iN
eS
AS
Sem
BL
Y
Tr
OUBL
eSHOO
TiNG
&
m
AiNT
eNANC
e
Be
FO
re
YOU
Be
Gi
N
AS
Sem
BL
Y
AS
Sem
BL
Y

iNT
rODUC
Ti
ON
im
PO
rT
ANT
Pre
CA
UT
iONS
eLL
iP
Ti
CAL
OP
er
AT
iON
COND
iT
iON
iNG
GU
iD
eL
iN
eS
Tr
OUBL
eSHOO
Ti
NG
&
m
Ai
NT
eNANC
e
Limi
Te
D
W
Arr
ANTY
Tr
OUBL
eSHOO
Ti
NG
&
m
Ai
NT
eNANC
e
Are THe SOUNDS mY eLLiPTiCAL mAKeS NOrmAL?
Our ellipticals are some of the quietest available because they use belt drives and friction free
magnetic resistance. We use the highest grade bearings and belts to minimize noise. However, because
the resistance system itself is so quiet, you will occasionally hear other slight mechanical noises.
Unlike older, louder technologies, there are no fans, friction belts, or alternator noises to mask these
sounds on our ellipticals. These mechanical noises, which may or may not be intermittent, are normal
and are caused by the transfer of significant amounts of energy to a rapidly spinning flywheel. All
bearings, belts and other rotating parts will generate some noise which will transmit through the
casing and frame. It is also normal for these sounds to change slightly during a workout and over time
because of thermal expansion of the parts.
WHY iS THe eLLiPTiCAL i HAD DeLiVereD LOUDer THAN THe ONe AT THe STOre?
All fitness products seem quieter in a large store showroom because there is generally more background
noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a
wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If
a fitness product is placed close to a wall, there will be more reflected noise.
HOW LONG WiLL THe DriVe BeLT LAST?
The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts
are now commonly used in far more demanding applications such as motorcycle drives.
CAN i mOVe THe TrAiNer eASiLY ONCe iT iS ASSemBLeD?
Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical
by rolling it on the front transport wheels. It is important that you place your elliptical in a comfortable
and inviting room. Your elliptical is designed to use minimal floor space. Many people will place
their ellipticals facing the TV or a picture window. If at all possible, avoid putting your elliptical in a
unfinished basement. To make exercise a desirable daily activity for you, the elliptical should be in a
comfortable setting.
CAN i PeDAL BACKWArDS ON mY eLLiPTiCAL?
Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider
range of muscles.
COmmON PrODUCT QUeSTiONS
WHAT KiND OF rOUTiNe mAiNTeNANCe iS reQUireD?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance steps are to wipe perspiration off the unit after each use and periodically checking the
assembly bolts for tightness.
HOW DO i CLeAN mY eLLiPTiCAL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your elliptical and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, Horizon Fitness recommends that the following
preventive maintenance schedule be followed.
AFTer eACH USe (DAiLY)
Turn off the elliptical by unplugging the power cord from the wall outlet
• Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to
the elliptical.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the elliptical or in any other area where it can
become pinched or cut.
To remove power from the elliptical, the power cord must be disconnected
from the wall outlet.
WeeKLY
Clean underneath the elliptical, following these steps:
• Turn off the elliptical
• Move the elliptical to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath
the elliptical.
• Return the elliptical to its previous position.
eVerY mONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
• Clean any debris off of the pedal arm wheels and guide rails.
mAiNTeNANCe
WARNING
E901_Rev.1.7.indd 32-33 9/10/08 11:07:17 AM