Honeywell HNDR-S 4848 - Manual (Page 4)

HONEYWELL SECURITY TECHNICAL BULLETIN
11 December 2008
www.asia.security.honeywell.com Rev 1.0 4 of 5
HNDR-S 4848 DVR Configuration
1. Configure Communication port
a. Push Menu button of DVR and enter the DVR setting menu.
b. Move to System menu and select Serial Setup.
c. Move to COM2 485 and select Keyboard HTX-3000 as below figure.
2. Configure Keyboard Control Address and Keyboard PTZ address as below figure.
a. Push Menu button of DVR and enter the DVR setting menu.
b. Move to Miscellaneous menu.
c. Select Keyboard Control Address to 1.