Hobart Welding Products AirForce 250ci - Manual (Page 27)

.
A complete Parts List is available at www.HobartWelders.com
OM-230 455 Page 23
6-4. Compressor Filter Cleaning And Replacement
Y Turn Off power source, and
disconnect input power.
1 Power Source
2 Compressor Filter
Remove wrapper from unit.
Unscrew filter from compressor.
Clean debris from filter surface or
replace filter, if necessary.
.
Do not overtighten filter.
Screw filter back into compressor.
Tighten 1 full turn past hand tight.
Reinstall wrapper.
Tools Needed:
5/16 in
Ref. 804 887-A
2
5/8 in
1