Hobart Welding Products AirForce 250ci - Manual (Page 32)

OM-230 455 Page 28
SECTION 8 − PARTS LIST
8-1. Recommended Spare Parts
Description
Part
No.
Item
No.
Recommended Spare Parts
Quantity
Dia.
Mkgs.
232 647 TORCH, HP-25 16.4ft (5 m) hand held (replacement) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
208 820 CLAMP, work 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
770 496 CONSUMABLE KIT, tip/electrode 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
770 497 CONSUMABLE KIT, cup/swirl ring/O-ring 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
232 015 FILTER, air intake compressor 1/8 NPT 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230 445 CABLE, work 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
233 321 STAND-OFF GUIDE, HP−25 PLASMA TORCH 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
230 446-B
CAUTION
Turn off power before checking torch parts.
Check before each use and hourly during operation.
Torque electrode lightly w/small wrench (15 – 20 in. lbs.)
FAILURE TO REPLACE WORN TIP OR ELECTRODE
WILL DAMAGE TORCH AND VOID WARRANTY.
HP−25 CONSUMABLE KITS
230 446−B
Retaining Cup
Tip Electrode
Swirl Ring O−Ring
770 496
770 497
Figure 8-2. Consumable Parts For HP-25
A complete Parts List is available on-line at
www.HobartWelders.com
NOTE
To maintain the factory original performance of your equipment, use only Manufacturer’s Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.