Hitachi 55DMX01WD - Manual (Page 14)

14
REAR SPEAKER TERMINAL CONNECTIONS
CONNECT AFTER TURNING THE POWER OF THE TV OFF.
Push in the Right Speaker button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull
the red button back to original position and the wire is locked into place. In the same manner, push in the Right Speaker black button
and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
TO
EXTERNAL
SPEAKER
-
L
+
- +
R
PROJECTION TV SPEAKER AMPLIFIER
CAUTION: Do not connect speakers simultaneously to the REAR SPEAKER terminal of the Rear Projection TV and an
external amplifier. This could damage both the TV and the speakers. Your TV was designed to use 8-Ohm
speakers only. Any other type may degrade the audio performance of your entertainment system.
CAUTION: Do not short speaker terminal, (do not connect a wire directly across any two terminals). This could cause
damage to your audio outputs or TV.