HP ProLiant DL385 - Manual (Page 117)

Server software and configuration utilities 117
5. Select Network, NIC and TCP/IP, press the Enter key, and type the
appropriate information in the IP Address, Subnet Mask, and Gateway IP
Address fields.
6. Save the changes. The iLO system automatically resets to use the new setup
when you exit iLO RBSU.
USB support
HP provides both standard USB support and legacy USB support. Standard
support is provided by the operating system through the appropriate USB device
drivers. HP provides support for USB devices before the operating system
loading through legacy USB support, which is enabled by default in the system
ROM. HP hardware supports USB version 1.1.
Legacy USB support provides USB functionality in environments where USB
support is normally not available. Specifically, HP provides legacy USB
functionality at:
• POST
• RBSU
• Diagnostics
• DOS
• Environments which do not support USB natively
For more information on ProLiant USB support, refer to the HP website
(
http://www.compaq.com/products/servers/platforms/usb-support.html ).
Diagnostic tools
List of tools:
Survey Utility ............................................................................................................................. 118
Array Diagnostic Utility ............................................................................................................. 118
HP Insight Diagnostics ............................................................................................................... 118
Integrated Management Log....................................................................................................... 119